TEAM Homepage     Overview     Plug-In Modules    Team Specifications TEAM Plug-in Modules T1 Multiplexer Supports multiplexing and de-multiplexing of T1 signals. All signals from the Encoder, Decoder, X.21 or V.35 Interfaces are routed through the internal bus to the T1/E1 module. Connects to T1 leased line Full function on-board CSU/DSU with line diagnostics Fully functional Drop & Insert supports complex networks Two RS232 interface ports to utilize free time slot capacity Status LEDs and test port for in-service maintenance E1 Multiplexer Supports multiplexing and de-multiplexing of E1 signals. All signals from the Encoder, Decoder, X.21 or V.35 Interfaces are routed through the internal bus to the E1 module. Connects to E1 leased line ITU-T G.703 compliant Fully functional Drop & Insert supports complex networks Two RS232 interface ports to utilize free time slot capacity Status LEDs and test port for in-service maintenance Stereo Codec (Encoder & Decoder) Module Supports analog or AES/EBU digital inputs and outputs and RS232 ancillary data 24-bit A-to-D converter for superior performance 24-bit D-to-A converter for superior performance Supported algorithms: Linear (J.57), MPEG Layer 2, J.41 (384 kb/s mono) and G.722 Switchable gain settings: +15, +18 and +21 dBu clipping levels Automatic rate adapter circuitry for AES/EBU timing Stereo Encoder Module (room for up to 6 units) Supports analog and AES/EBU digital inputs, RS232 ancillary data and satellite relay command functions 24-bit A-to-D converter for superior performance Supported algorithms: Linear (J.57), MPEG Layer 2, MPEG Layer 3, J.41 (384 kb/s mono) and G.722 Switchable gain settings: +15, +18 and +21 dBu clipping levels Automatic rate adapter circuitry for AES/EBU timing Stereo Decoder Module (room for up to 6 units) Supports analog or AES/EBU digital outputs and RS232 ancillary data 24-bit D-to-A converter for superior performance Supported algorithms: Linear (J.57), MPEG Layer 2, MPEG Layer 3, J.41 (384 kb/s mono) and G.722 Switchable gain settings: +15, +18 and +21 dBu clipping levels Automatic rate adapter circuitry for AES/EBU timing X.21 Module Receives and transmits data at bit rates of n x 64 kb/s Two fully independent bi-directional ports Provides continuous clock and data V.35 Module Receives and transmits data at bit rates of n x 64 kb/s Two fully independent bi-directional ports Provides continuous clock and data 3-BRI ISDN Module Available with 1, 2 or 3 ISDN BRI connections Contains both U (North America) and S/T ISDN interfaces Ideal for STL backup