TEAM Homepage     Overview     Plug-In Modules    Team Specifications TEAM Specifications Physical Dimensions 19" W x 7" H x 9.8" D 48.3 x 17.8 x 24.9 cm Weight 20 lbs. 9 kg Power Requirements Universal AC Supply 90-255 VAC, 48-65 Hz 60 VDC Supply 42-75 VDC Environmental Temperature 41° F to 113° F +5° C to +45° C Humidity 20% to 80%, non-condensing Encoder Connector Gold plated Neutrik® XLR Female A/D Converter 24 bit delta-sigma Sampling Frequency 16, 24, 32 & 48 kHz Input Impedance 600 ohms or >12K ohm, selectable Clipping Level +15, +18, +21, +/-1 dBu, selectable THD+N <0.005% at 1 kHz SNR >95 dB Crosstalk <-90 dB L/R Phase Difference <0.5° Algorithms CCS MUSICAM® Old CCS MUSICAM® New ISO/MPEG Layer II ISO/MPEG Layer III G.722 J.41 J.57 Digital Input AES/EBU or S/PDIF Lock Range +/- 200ppm Rate Adaption Automatic Ancillary Data Connector DB25 Female Ancillary Data Bit Rates 300, 1200, 2400, 9600 & 38,400 bps Ancillary Data Mode 8 data bits, 1 stop bit Decoder Connector Gold plated Neutrik® XLR Male D/A Converter 24 bit delta-sigma Sampling Frequency 16, 24, 32 & 48 kHz Output Impedance 600 ohms or <20 ohm, selectable Clipping Level +15, +18, +21, +/-1 dBu, selectable THD+N <0.005% at 1 kHz SNR >95 dB Crosstalk <-90 dB L/R Phase Difference <0.5° Algorithms CCS MUSICAM® Old CCS MUSICAM® New ISO/MPEG Layer II ISO/MPEG Layer III G.722 J.41 J.57 Digital Output AES/EBU or S/PDIF Lock Range +/- 200ppm Rate Adaption Automatic Digital Audio Sync Input Ancillary Data Connector DB25 Female Ancillary Data Bit Rates 300, 1200, 2400, 9600 & 38,400 bps Ancillary Data Mode 8 data bits, 1 stop bit T1 Multiplexer Line termination DB9 or RJ45 CSU/DSU All diagnostics included E1 Multiplexer Meets or exceeds ITU-T G.703 specifications