Audio Source
The NetStar allows you to select input and output audio sources separately. This way you can have the digital and analog combination of your choice.

Set Audio Source via Front Panel Method
  1. From the STATUS screen, press ENTER to go to the MAIN MENU screen.
  2. Press 4 to select CONFIGURE and go to the CONFIG MENU screen.
  3. Press 2 to select Setup Audio and go to the CONFIG AUDIO screen.
  4. Press 1 to select Audio Input Setup.
  5. Press 1 to select Source.
  6. Use the UP or DOWN ARROWs to select Analog or Digital, and press ENTER.
  7. Press ESC(*) to get back to the CONFIG AUDIO screen.
  8. Press 2 to select Audio Output Setup.
  9. Press 1 to select Source.
  10. Use the UP or DOWN ARROWs to select Analog or Digital, and press ENTER.
  11. Press ESC(*) a few times to get back to the MAIN MENU screen.

Back to NetStar Support






Set Audio Source via Web control Method
From the Configure screen, go to Audio Setup, select Input and output source and set to either analog or digital.
Click "Apply Changes" located at the bottom of the screen to save your settings.
Back to NetStar Support