PRIMA LT Upgrade 

1.) Extract the file "lt106.zip" into a directory 
    named PrimaLT.
2.) Connect the female end of the C1800 Rear Panel
    Remote Control cable to the RS-232 Serial port 
    (COM1 or COM2) of the PC.
3.) Connect the male end of the C1800 cable to the Remote 
    Control port on the rear panel of the PrimaLT.
4.) Power up the PrimaLT while pressing the Up Arrow key until
    the word "Hold" appears on the LCD screen of the PrimaLT.
5.) From the PrimaLT directory on the PC, run "PRIMALT.BAT"
    by typing PRIMALT [Enter]. 
6.) Follow the on screen instructions to begin the download
    process.
7.) When the download is completed, power down PrimaLT, then 
    power back up and wait for complete boot up process. 
8.) Upgrade is complete.


NOTE: Windows users may run "PrimaLT.bat" from either the 
      Start Menu Run Command, or by using Windows Explorer 
      to open "PrimaLT.bat"